View Full Version : help fordson brackets
shorty's shaker
30-04-08, 10:27 PM
does anyone no what the two brackets on rivets towards the top centre of bulkhead are for?
http://i223.photobucket.com/albums/dd226/shortysshaker/DSCF2811.jpg
PMSL .... i just asked the same on the other thread !
shorty's shaker
30-04-08, 11:52 PM
must admit i aint sure either,but just ad a thoght do you reckon it could be a way of holding bonnet up instead of the bonnet stay's on the front? as the bonnet has no rings for the bonnet bars & no loops on the grill.(may be a commercial thing)
Crumble, Ian or Doug ....???
Blackpopracing
01-05-08, 01:26 AM
I'd certainly guess at bonnet locators?
I'd guess bonnet stay. Not all grills had the tags to hold the stays did they? I thought that was something else that got removed from the Anglia - Pop stage.
shorty's shaker
01-05-08, 01:47 PM
well just found a pic i took age's ago when the front panels were on & never gave a thought of trying the brackets to see if they hold the bonnet sides up,but still not convinced they will hold (judge for yourselfs)
http://i223.photobucket.com/albums/dd226/shortysshaker/IM000490.jpg
I`m sure they`re hood props Lee. The shorter `leg` hooks under the centre lip holding it in place, and the longer `leg` then supports the weight of the hood.
The hoods weight holds it all in place when propped open.
If that's the original hood, you might find witness marks on it where the prop has been used before
With a 'ickle' bit of phototrickery, you can see how it would work.
http://usera.imagecave.com/Klunk/Cars/fordsonhoodcopy2.jpg
Quite an innovative bit of inginuity very clever.
So THAT'S what a Fordson bulkhead looks like :)
(sorry not much help...)
They are most certainly bonnet prop's. Had them on mine.
shorty's shaker
01-05-08, 09:36 PM
I`m sure they`re hood props Lee. The shorter `leg` hooks under the centre lip holding it in place, and the longer `leg` then supports the weight of the hood.
The hoods weight holds it all in place when propped open.
If that's the original hood, you might find witness marks on it where the prop has been used before
With a 'ickle' bit of phototrickery, you can see how it would work.
http://usera.imagecave.com/Klunk/Cars/fordsonhoodcopy2.jpg
Quite an innovative bit of inginuity very clever.
So THAT'S what a Fordson bulkhead looks like :)
(sorry not much help...)
ok thanx guy's,hopefully putting panels back on for mockup this w.end so will try it then
crumble
01-05-08, 11:11 PM
bonnet stays 100%.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.