61148
37 pickup grille shell £450
61149
1936 ford lhd steering box column and drop and a tosted 40 deluxe wheel frame
£100 - or that is the pitman arm you want for stock ford taper onto an f1...
Type: Posts; User: nobler
61148
37 pickup grille shell £450
61149
1936 ford lhd steering box column and drop and a tosted 40 deluxe wheel frame
£100 - or that is the pitman arm you want for stock ford taper onto an f1...
not drilled
anyone in the UK have one
thanks
and perch pins for a stock 36 bone - or a stock pin
not from a 40 with a 2 1/4 boss
got lots to swapsies
i.e.
swap frp a [;ain
48
36.5 perch
2'' boss
socal axle
thanks
also for sale
real nice 1936 axle - californocan, £200
1937-40 axle bare real nice £75
has it got the 2'' perch boss, or the 2 1/4
thanks
61056
would you be interested in a direct swapsies for a
so-cal forged and drilled
47'' wide
34'' perch
2 1/4 boss
version
thanks
I have a 36 axle with one broken pin, I can either replace the one with a stocker and cut them both, or fit 2 aftermarket ones, if stock, they have got to lock into a 36 bone
- - - Following new...
clearout of ****e
one 2.5 rwd jag duratec v6 engine £100
one st200 2.5 v6 engine £100
one transit 6 speed gearbox £100
one 5 speed transit gearbox case with a set of unfitted sierra xr4i...
needn't be shiney
also need one imrc metric caliper that is imperial 7/16
not stock m10 versions
the speedway ones for 7/16 -20 banjo bolts
bare will do
new
or good used
thanks
1. 1937 ford pickup grille shell - not bad not mint £500 - NOW £400
2. crap 37 ford grille shell needsd 'nuff' help £100 = 75 now £70
3. 37 commercial, maybe 35 36 37 radiator £250 NOW £200
...
stock one
please
ANYONE REMOVED ONE OR HAVE ONE FROM 38 39 40 AS I JUST need it to look a bit stock
as i have a stock bench
bare engone
but with the x type sump and pickup
the left giblet hangers have been ground away
125
60177
60178
60179
60180
60181
60176
ford st200 intake £90
st200 engine £150
mt75 remote 4wd £50
do have the guts and 4wd mt75 parts but no case £100
60171
cosworth bob 1995 starter £54
60172
£54
60173
cologne v6 cosworth flex plate and spacer £35
60174
colcogne v6 cosworth engine mounts
£35
https://www.jalopyjournal.com/forum/attachments/img_20231223_183538-jpg.5926794/cosworth v6 bob
2.9 flywheel - the heavy one - i think - note you need the crank to flywheel bolts, as they are a wee...
looking at the rad from the front, i need lower to the right
upper to the left or middle
i have lower left and upper right - fill on left
before i go and melt it
oh and i need a cologne...
[
1. bob cosworth starter motor cleaned and painted £54
2. new s type starter £54
3. x type jaguar/mondeo starter clean £35
4. mondeo mk2 starter £40
5. s type jaguar 3.0 rwd block plate £30
6....
is the 2.3 petrol transit the same mt75 as the twin cam rwd sierras
or
can i use the rear 2wd section from a transit mk 5 2.3 petrol
on a 4wd mt75
they look the asme.
the stick position is a...
sorted
need a transit 3 bolt prop shaft
thanks
1995 COSWORTH V6 bob ECU EEC-V PIN OUT
NOTE, THEY ARE ALL AUTOMATIC ECU'S THEY NEVER MADE A MANUAL
THE PATS IS IN A SEPERATE UNIT FROM THE ECU
THE EDIS CRANK TRIGGER HAS ITS OWN SEPERATE UNIT 11...
Ian
basically....
i have just bought that v6 engine and will be going through the loom so its like yours
I also done buyed anotehr zetec ecu and plug to re-teach myself
or if you like i have a...
what you didn't tell me was the mk1 and mk2 mondeo engines at 2.5 have a different gearbox bop bell housing pattern to the later 3 litres the st220 - uses a slightly different layout shared 3 litre...
there is no aftermarket ecu that
1. can operate a vapour valve tank vent.
2. operate a exhaust gas recirculation valve.
3. give you a free pats immobiliser
4. operate any kind of intake manifold...
what the problem is is.......
when you go and buy an engine from a breaker or whatever you do not get
1. the keys
2. the ecu
3. the cats- the oxy sensors
4. the vapour cannister
5. the fuel...