Results 1 to 3 of 3

Thread: 30/31 Ford Model A Tudor Sedan Steel Body & Chassis. £5,000. SOLD

  1. #1
    Guest ALABAMA ANDY's Avatar
    Join Date
    Aug 2008
    Posts
    81

    30/31 Ford Model A Tudor Sedan Steel Body & Chassis. £5,000. SOLD

    SOLD


    #####UPDATE##### See next post below for new info & price for selling the lot to finish this car........

    With the "soon to be losing my storage" situation on the horizon I've decided to put the car that's furthest from completion up FOR SALE.
    This is JUST the body & chassis i'm selling as the rest of it I can store elsewhere.
    But I am willing to sell everything I've got to complete this car in one sale if your vision of this build is the same as my vision of course.
    So I shall begin.......

    30/31 Ford Model A Tudor Sedan Steel Body, complete with the doors & visor.
    Chopped approx 6".
    Rear 1/4's sectioned approx 4" (height not length).
    Un-cut gas tank with cap & gauge.
    Stock firewall modified to clear dizzy.
    Very nice original front fenders.
    Fantastic original rear fenders.
    Original running boards.
    Original headlamp bar.
    Very nice original four piece hood.
    Original stainless grill shell.
    Original screen surround (not yet been chopped).
    New Stainless windshield slide swing arms kit.
    Door handles & latches (non original).
    1" sq steel frame & supports built to fit roof opening.
    1" sq steel frame sub floor.

    Built to fit 4x2 Box Chassis (included).
    Home made front frame horns.
    Model A front cross member.
    4" Front kick up (behind firewall).
    14" rear kick up.
    Front end set up for traditional I beam / split bones.
    Rear end set up for 4 Link / Panhard.
    Engine / Trans mounts set up for 350/350 combo.
    Homemade pedals & mounts (floor pivot RHD).
    Steering box mount for stock length VW Splitty steering box / column.

    That's it.......
    No glass, no frills, nothing else.
    Chop & some chassis welding needs finishing.
    All hard work done.
    Was designed to fit me 6'2" with ease.
    Was built to sit low & fully fendered with running boards at sill height (minus splash aprons) in the style of Paul Barrow's Sedan.

    Chassis is Registered.
    Was originally from an old build reg'd in 1975.
    So has grandfather rights from the off.
    V5c in my name.

    £5,000 for everything listed above.

    Body & Chassis (in bits) in SE London / N Kent borders.
    Delivery will be possible at cost relative to distance (I have a very reliable & reasonable man who could possibly deliver).

    I do have 99.9% of everything needed to complete this build.
    Nothing in pieces, all complete.
    Loads of new & NOS parts.
    It can all be bought together but I wont be selling anything before the body & chassis is gone (unless you buy the lot that is).
    I even have a six digit pre-suffex Reg Number on retention that can be purchased for the car if you cant stomach an "N" reg.

    This pic below is the only pic I have on my computer of it & was taken the day I pulled it apart to move to a yard to finish the welding.
    That's as far as it got.
    This is the first time I've touched my computer in a year or so.
    So I would phone or text me on 07930 890427 rather than PM me on here as you've more chance of getting me that way.
    Thanks for reading all this.
    Andy.

    P.S. The price is for what i have LISTED above, NOT all what you can see in the pic.
    Thanks.

    Name:  Model A Feb 2013.JPG
Views: 1471
Size:  164.9 KB
    Last edited by ALABAMA ANDY; 11-08-19 at 02:12 AM. Reason: Forgot price in titlel

  2. #2
    Guest ALABAMA ANDY's Avatar
    Join Date
    Aug 2008
    Posts
    81
    #####Update#####

    Due to several people enquiring about "how complete can the car be bought ?" i've decided to list EVERYTHING that I basically have.
    This can ALL be purchased together & will pretty much finish the car.

    Front End......
    5" Dropped Magnum Beam (New).
    SoCal Reversed Eye Front Spring (New).
    Stainless Shackle kit (New).
    Dropped Steering Arms (New).
    40 Ford Spindles (New).
    Kingpin Kit (New).
    Perch Bolts (New).
    Steering Arm Hoop (New).
    Lower Shock Mounts (New).
    Spindle Nuts (New).
    Front U Clamp Kit (New).
    40 Ford Track Rod Ends (New).
    SoCal Red Front Shocks (New).
    40 Ford Split Bones with New Tie Rod Ends Fitted.
    VW Splitty Bus Steering Box With Un-Cut Column.
    Speedway Front Disk Brake Kit Complete (New).
    PLUS 57-60 Ford F100 Front Drum Brakes With New Wheel Cylinders If You Prefer a More Traditional Look Behind The Wheels.

    Rear End.....
    Volvo Axle (From A 760 I've Been Told).
    Adjustable 4 Link & Panhard.
    Spax Adjustable Coilovers (New).

    Engine.....
    305 SBChevy (complete & was out of a running, driving car).
    Edelbrock 4 Brl Intake Manifold.
    Holley 4 Brl Carb (unsure of model or condition).
    Mini Hi Torque Starter (New).
    Ally Short Water Pump (New).
    Ally Short Bottom Pulley (New).
    Electronic Ign Dizzy (New).
    Accell Plug Leads (New).
    Engine Mount Kit (New).
    Lakes Style Header Kit (New).
    Finned Polished Ally Valve Covers (New).
    Polished Preathers (new).
    Finned Polished Ally Fuel Pump Block Off (New).
    Early Offenhauser Finned Polished Ally Scoop (N.O.S.).
    Electric Fuel Pump & Regulator (New).

    Trans.....
    350 Trans with H/D Kit Fitted.
    Std Torque Converter (New).
    Gearbox Mount (New).
    Locar 23" Swansneck Shifter Kit (New).
    Locar Handbrake Kit (New).

    Wheels & Tyres.......
    Five Wheels.
    All 5x15 Steels, 5on5 PCD (The Rear Ones In The Pic Above).
    Now Blasted & Etch Primed, Dead Straight & Balance True.
    Set of Part Steel, Part Chrome Caps (Steel Part Blasted & Etch Primed).
    8.20x15 Avon Blackwall Rear Tyres.
    5.60x15 Firestone Whitewall Front Tyres & New Spare.
    Fit To The Hubs On All New Billet Adaptors.

    Inside......
    Narrowed & Filled 40 Ford Dash With 36 Ford Centre (Blasted & Etch Primed).
    57 GMC Pickup Gauges & Rings.
    36 Ford Centre Waterfall Piece.
    Pilot Steering Wheel.
    Switches, Idiot Lights, New Indicator Kit, Ign Switch, Etc......
    Early Ford Football Mirror (Possibly 32 ?).
    Harnesses (New).
    Stripped Steel 50's Bomber Style Seats, Forward Flipping To Access Battery.

    Extras.....
    Front Half Chevy 350 Prop.
    Rear Half Volvo Prop.
    36 Ford Headlamps With Original English Lamp Conversion Rings & UK Sealed Beam Units.
    Bullet Indicators, Early Glass Rear Lamp lenses / surrounds.
    All Wiring (New).
    Radiator (New) That Will Need Shortening.
    Volvo Brake Master & Servo.
    Brake Lines.
    Fuel Lines.
    Rivnut Kits To Fit The Body To The Chassis.
    Fuel / Brake Line / Wiring Fitting Clips.
    You Get The Idea.......

    This car was fully assembled & most stuff that came off was replaced with new.
    It was then pulled apart to finish & tidy any welding that was done & paint the chassis before the steel body was mounted.
    This was several years ago & I'm just really not interested in it anymore.
    Its been apart for far too long.

    £8,000 gets the lot.
    Apart from any glass, a wooden floor, an Alternator, some nuts/bolts & two Tie Rods.........I'd say its all there to get it back on the road.
    As I said previously..... delivery is possible at cost relative to distance.

    Thanks for reading all this.
    Andy.
    Last edited by ALABAMA ANDY; 29-07-19 at 09:55 PM. Reason: spelling

  3. #3
    Guest ALABAMA ANDY's Avatar
    Join Date
    Aug 2008
    Posts
    81
    Sold

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •