Results 1 to 5 of 5

Thread: Window size allowance

  1. #1
    NSRA member falcon's Avatar
    Join Date
    Dec 2004
    Posts
    2,052

    Window size allowance

    Hi Iím going to get my windows cut on a Austin ruby . Iím going to make a template for them to cut the glass. Iím going to offer a card and mark round the opening . My question is how much either side do I add ( these are for the doors ) 5 mm to slide in Iím thinking. Thanks

  2. #2
    NSRA member Morris460's Avatar
    Join Date
    Sep 2003
    Posts
    3,892
    Images
    4
    You need to make a ply template that fits your runners, fit and check it moves and seals as it should.
    Any other method is heading for failure.
    Layabout.

  3. #3
    NSRA member falcon's Avatar
    Join Date
    Dec 2004
    Posts
    2,052
    Yes you’re right thanks. I need to order the rubber ect cheers

  4. #4
    NSRA member
    Join Date
    Jun 2003
    Posts
    3,930
    Images
    2
    Small radius (1/2"???) on the bottom corners of the drop glass help prevent snagging.

    Chris

    Sent from my SM-T515 using NSRA mobile app
    Bumper sticker - This is an historic vehicle and only has three speeds....... if you don't like this one you sure as hell won't like the others.

  5. #5
    NSRA member falcon's Avatar
    Join Date
    Dec 2004
    Posts
    2,052
    Thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •